Shopping Cart
Your cart is empty
Welcome Guest
Manage Cart, Orders & Wishlist
Shop By Category
Description
The authentic hardware you need to correctly reassemble the engine components which attach to the long-block. Most fasteners are either meticulous reproductions or New Old Stock. Most items are made in USA to the same standards required by Chrysler. Note: Image is for reference only, actual kit will vary
| Part# | Application | Notes | Pcs |
|---|---|---|---|
| C-8027 | Differential Carrier Cover - 9 3/4 | 3/8" HX Flng Bolts "E" | 10 |
| C-8084 | Engine Insulator > Eng Brkt - exc HEMI | HX Nuts, Coni Wa's | 4 |
| C-8086 | Engine Mount Brackets - 383/440 | HX Bolts, 5/8 AD Nuts, Flat Wa's | 19 |
| C-8088 | Engine Insulator > Body - V8 exc HEMI | HX Bolts "38", Coni Wa's | 4 |
| C-8094 | Trans > INsulator > Trans | HX Coni Sems, Sqr Wa's | 4 |
| C-8104 | Wheel Cylinders (2) w 1/4-20 | HX Flng Screws | 4 |
| C-8105 | Strut Rod > K-Frame | 5/8-11 Lock Nuts | 4 |
| C-8106 | Driveshaft > Flange | Straps, HX Bolts, Split Wa's | 10 |
| C-8110 | Shocks (Fr) - Lwr Mounting | 7/16 HX Bolts "TR" or "D", Lock Nut | 4 |
| C-8111 | Stabilizer Bar Center Supports | HX Bolts "H", Coni Sems, Lock Nuts | 16 |
| C-8112 | Leaf Spring Mounting @ Front | Hub Bolts, Coni Keps | 16 |
| C-8113 | Shackles - Nuts Only | HX Nuts | 4 |
| C-8115 | Axle Housing > Springs | 1/2-20 x 7.12 U-Bolts, Lock Nuts | 12 |
| C-8117 | Suspension Bumpers Brkt > 8 3/4 Axle | HX Coni Sems "Anchor" | 2 |
| C-8120 | Shocks (Rr) - Upr Mounting | HX Nuts Only | 2 |
| C-8121 | Brake Calipers > Spindle | HX Coni Sems | 4 |
| C-8122 | Brake Rotor Shields | HX Coni Sems | 6 |
| C-8123 | Shocks (Rr) - Upr Mounting | HX Bolts, Lock Nuts | 4 |
| C-8124 | Steering Gear | HI-HX Bolts, Split Wa's | 6 |
| C-8125 | Brake CAliper Tube Brackets | HX Coni Sems | 4 |
| C-8131 | Gas Tank | J-Bolts, Lock NUts | 4 |
| C-8133 | Differential Carrier - 8 3/4 | Nuts w/ Nylon Patch | 10 |
| C-8157 | Suspension Bumper Brkt > 9 3/4 Axle | HX Coni Sems "Anchor" | 3 |
| C-8176 | Suspension Bumpers (Fr) | Cone Lock Nuts | 4 |
| C-8177 | Brake Drum Retainers | 1/2" Stud, Green Push On Retain | 6 |
| C-8178 | Steering Linkage | Tri-slot Nuts, Cotter Pins | 12 |
| C-8200 | Trans Crossmember | Flng Bolts, Flng Nuts | 8 |
| C-8202 | Brake Cable Tension Adjuster | Flange Lock Nut Only | 1 |
| C-8203 | Proportioning Valve> Apron | Red Flange Lock Nut | 1 |
| C-8212 | Control Arms (Upr) | Cam Bolts, Washers, Nuts | 4 |
| C-8214 | Leak Spring Mounting @ Front | "H" Marked Bolts, Marsden Nut | 4 |
| C-8215 | Idler Arm | "TR" Hex Bolt, Tri-slot Nut, Pin | 3 |
| C-8216 | K-Frame > Body | Special Hex Coni Sems | 4 |
| C-8222 | Axle Retaining Nuts | HX Lock, Nuts, Flng Nuts | 10 |
| C-8224 | Ball Joint w/ Disc Brakes | HX Bolts, Slotted Nuts, Pins | 12 |
| C-8226 | Pitman Arm | Nut, Split Wa | 2 |
| C-8228 | Brake Hoses > Bracket Clips | U-Clips | 3 |
| C-8330 | Parking Brake Control > Body | HX Coni Sems, Coni Keps | 3 |
| C-8332 | Master Cylinder | HX Luck Nuts | 4 |
| C-8334 | Master Cylinder Support Plate | Coni Keps, Ext Keps, Sealer | 5 |
| C-8336 | Brake Booster | Hx Lock Nuts | 4 |
| C-8338 | Accelerator Pedal | Coni Keps, Coni Sems | 6 |
| C-8339 | Trans Insulator > Crossmember | HX Bolt, Flat Wa, Lock Nut | 3 |
| C-8440 | Suspension Bumpers (Rr) | HX Flng Screws | 4 |
This fits:
1971 - 1972
Plymouth Barracuda
1971 - 1972
Dodge Challenger
1971 - 1972
Plymouth GTX
1971 - 1972
Dodge Charger
1971
Dodge Super Bee
1971 - 1972
Plymouth Road Runner
1971 - 1972
Plymouth Satellite
Vehicle Applications
1971 Plymouth Barracuda
1972 Plymouth Barracuda
1971 Dodge Challenger
1972 Dodge Challenger
1971 Plymouth GTX
1972 Plymouth GTX
1971 Dodge Charger
1972 Dodge Charger
1971 Dodge Super Bee
1971 Plymouth Road Runner
1972 Plymouth Road Runner
1971 Plymouth Satellite
1972 Plymouth Satellite
Customer Reviews
Customer Reviews
No reviews yet
Be the first to review this product!
Description
Description
The authentic hardware you need to correctly reassemble the engine components which attach to the long-block. Most fasteners are either meticulous reproductions or New Old Stock. Most items are made in USA to the same standards required by Chrysler. Note: Image is for reference only, actual kit will vary
| Part# | Application | Notes | Pcs |
|---|---|---|---|
| C-8027 | Differential Carrier Cover - 9 3/4 | 3/8" HX Flng Bolts "E" | 10 |
| C-8084 | Engine Insulator > Eng Brkt - exc HEMI | HX Nuts, Coni Wa's | 4 |
| C-8086 | Engine Mount Brackets - 383/440 | HX Bolts, 5/8 AD Nuts, Flat Wa's | 19 |
| C-8088 | Engine Insulator > Body - V8 exc HEMI | HX Bolts "38", Coni Wa's | 4 |
| C-8094 | Trans > INsulator > Trans | HX Coni Sems, Sqr Wa's | 4 |
| C-8104 | Wheel Cylinders (2) w 1/4-20 | HX Flng Screws | 4 |
| C-8105 | Strut Rod > K-Frame | 5/8-11 Lock Nuts | 4 |
| C-8106 | Driveshaft > Flange | Straps, HX Bolts, Split Wa's | 10 |
| C-8110 | Shocks (Fr) - Lwr Mounting | 7/16 HX Bolts "TR" or "D", Lock Nut | 4 |
| C-8111 | Stabilizer Bar Center Supports | HX Bolts "H", Coni Sems, Lock Nuts | 16 |
| C-8112 | Leaf Spring Mounting @ Front | Hub Bolts, Coni Keps | 16 |
| C-8113 | Shackles - Nuts Only | HX Nuts | 4 |
| C-8115 | Axle Housing > Springs | 1/2-20 x 7.12 U-Bolts, Lock Nuts | 12 |
| C-8117 | Suspension Bumpers Brkt > 8 3/4 Axle | HX Coni Sems "Anchor" | 2 |
| C-8120 | Shocks (Rr) - Upr Mounting | HX Nuts Only | 2 |
| C-8121 | Brake Calipers > Spindle | HX Coni Sems | 4 |
| C-8122 | Brake Rotor Shields | HX Coni Sems | 6 |
| C-8123 | Shocks (Rr) - Upr Mounting | HX Bolts, Lock Nuts | 4 |
| C-8124 | Steering Gear | HI-HX Bolts, Split Wa's | 6 |
| C-8125 | Brake CAliper Tube Brackets | HX Coni Sems | 4 |
| C-8131 | Gas Tank | J-Bolts, Lock NUts | 4 |
| C-8133 | Differential Carrier - 8 3/4 | Nuts w/ Nylon Patch | 10 |
| C-8157 | Suspension Bumper Brkt > 9 3/4 Axle | HX Coni Sems "Anchor" | 3 |
| C-8176 | Suspension Bumpers (Fr) | Cone Lock Nuts | 4 |
| C-8177 | Brake Drum Retainers | 1/2" Stud, Green Push On Retain | 6 |
| C-8178 | Steering Linkage | Tri-slot Nuts, Cotter Pins | 12 |
| C-8200 | Trans Crossmember | Flng Bolts, Flng Nuts | 8 |
| C-8202 | Brake Cable Tension Adjuster | Flange Lock Nut Only | 1 |
| C-8203 | Proportioning Valve> Apron | Red Flange Lock Nut | 1 |
| C-8212 | Control Arms (Upr) | Cam Bolts, Washers, Nuts | 4 |
| C-8214 | Leak Spring Mounting @ Front | "H" Marked Bolts, Marsden Nut | 4 |
| C-8215 | Idler Arm | "TR" Hex Bolt, Tri-slot Nut, Pin | 3 |
| C-8216 | K-Frame > Body | Special Hex Coni Sems | 4 |
| C-8222 | Axle Retaining Nuts | HX Lock, Nuts, Flng Nuts | 10 |
| C-8224 | Ball Joint w/ Disc Brakes | HX Bolts, Slotted Nuts, Pins | 12 |
| C-8226 | Pitman Arm | Nut, Split Wa | 2 |
| C-8228 | Brake Hoses > Bracket Clips | U-Clips | 3 |
| C-8330 | Parking Brake Control > Body | HX Coni Sems, Coni Keps | 3 |
| C-8332 | Master Cylinder | HX Luck Nuts | 4 |
| C-8334 | Master Cylinder Support Plate | Coni Keps, Ext Keps, Sealer | 5 |
| C-8336 | Brake Booster | Hx Lock Nuts | 4 |
| C-8338 | Accelerator Pedal | Coni Keps, Coni Sems | 6 |
| C-8339 | Trans Insulator > Crossmember | HX Bolt, Flat Wa, Lock Nut | 3 |
| C-8440 | Suspension Bumpers (Rr) | HX Flng Screws | 4 |
This fits:
1971 - 1972
Plymouth Barracuda
1971 - 1972
Dodge Challenger
1971 - 1972
Plymouth GTX
1971 - 1972
Dodge Charger
1971
Dodge Super Bee
1971 - 1972
Plymouth Road Runner
1971 - 1972
Plymouth Satellite
Vehicle Application(s)
Vehicle Applications
1971 Plymouth Barracuda
1972 Plymouth Barracuda
1971 Dodge Challenger
1972 Dodge Challenger
1971 Plymouth GTX
1972 Plymouth GTX
1971 Dodge Charger
1972 Dodge Charger
1971 Dodge Super Bee
1971 Plymouth Road Runner
1972 Plymouth Road Runner
1971 Plymouth Satellite
1972 Plymouth Satellite
Reviews
Customer Reviews
Customer Reviews
No reviews yet
Be the first to review this product!
New
Truck Freight
This item ships truck freight (18 wheeler).
It is the buyers responsibility to inspect the shipment at time of delivery.
*Any damage must be noted on the BOL and confirmed by the driver.*
AMD cannot repair or replace a damaged item that has been signed for free and clear (without noted damage).
It is the buyers responsibility to inspect the shipment at time of delivery.
*Any damage must be noted on the BOL and confirmed by the driver.*
AMD cannot repair or replace a damaged item that has been signed for free and clear (without noted damage).
In Stock
Out of Stock
Out Of Stock
When your order is received and processed, funds are only captured (charged) for in-stock items and associated shipping.
** We will release your order to ship all in stock items when we process it. **
When out of stock items arrive, you will be notified and will need to provide a payment for the item(s) plus associated shipping.
** We will release your order to ship all in stock items when we process it. **
When out of stock items arrive, you will be notified and will need to provide a payment for the item(s) plus associated shipping.
New
In Stock
Out of Stock
Out Of Stock
When your order is received and processed, funds are only captured (charged) for in-stock items and associated shipping.
** We will release your order to ship all in stock items when we process it. **
When out of stock items arrive, you will be notified and will need to provide a payment for the item(s) plus associated shipping.
** We will release your order to ship all in stock items when we process it. **
When out of stock items arrive, you will be notified and will need to provide a payment for the item(s) plus associated shipping.
Truck Freight
This item ships truck freight (18 wheeler).
It is the buyers responsibility to inspect the shipment at time of delivery.
*Any damage must be noted on the BOL and confirmed by the driver.*
AMD cannot repair or replace a damaged item that has been signed for free and clear (without noted damage).
It is the buyers responsibility to inspect the shipment at time of delivery.
*Any damage must be noted on the BOL and confirmed by the driver.*
AMD cannot repair or replace a damaged item that has been signed for free and clear (without noted damage).
Be the first to review this product
New
Truck Freight
This item ships truck freight (18 wheeler).
It is the buyers responsibility to inspect the shipment at time of delivery.
*Any damage must be noted on the BOL and confirmed by the driver.*
AMD cannot repair or replace a damaged item that has been signed for free and clear (without noted damage).
It is the buyers responsibility to inspect the shipment at time of delivery.
*Any damage must be noted on the BOL and confirmed by the driver.*
AMD cannot repair or replace a damaged item that has been signed for free and clear (without noted damage).
In Stock
Out of Stock
Out Of Stock
When your order is received and processed, funds are only captured (charged) for in-stock items and associated shipping.
** We will release your order to ship all in stock items when we process it. **
When out of stock items arrive, you will be notified and will need to provide a payment for the item(s) plus associated shipping.
** We will release your order to ship all in stock items when we process it. **
When out of stock items arrive, you will be notified and will need to provide a payment for the item(s) plus associated shipping.
New
In Stock
Out of Stock
Out Of Stock
When your order is received and processed, funds are only captured (charged) for in-stock items and associated shipping.
** We will release your order to ship all in stock items when we process it. **
When out of stock items arrive, you will be notified and will need to provide a payment for the item(s) plus associated shipping.
** We will release your order to ship all in stock items when we process it. **
When out of stock items arrive, you will be notified and will need to provide a payment for the item(s) plus associated shipping.
Truck Freight
This item ships truck freight (18 wheeler).
It is the buyers responsibility to inspect the shipment at time of delivery.
*Any damage must be noted on the BOL and confirmed by the driver.*
AMD cannot repair or replace a damaged item that has been signed for free and clear (without noted damage).
It is the buyers responsibility to inspect the shipment at time of delivery.
*Any damage must be noted on the BOL and confirmed by the driver.*
AMD cannot repair or replace a damaged item that has been signed for free and clear (without noted damage).
Be the first to review this product